linear actuator

Linear Actuators (Linear Actuator) are widely used in Adjustable beds, Medical beds, Wheel chairs, Patient hoists, Table height

Specification of Linear actuators:

 Max. Thrust 8000N, Max. Pull 5000N

 Voltage of AT Linear Actuator: 24VDC or 12VDC, Permanent Magnet Motor Drive

 Chrome Plated Piston Rod eye with slot

 High Strength Plastic Housing and Gears

 Elegant and compact design with small installation size

 Standard protection class: IP 54

 Built-in integral limit switch, not adjustable after leaving factory

 Scratch and wear-resistant powder

 Painting on outer tube Φ30mm

 Stainless Steel Back Fixture

 Strong wear and corrosion resistant stainless steel inner rod

 Standard Stroke of linear actuator: 100/150/200/250/300/350/400 mm, special stroke are available according to customer' requirement.

 Duty cycle: 10%, comment: 2 minutes continuous work followed by 18 minutes rest

 Ambient temperature -5°C (23F) to +40°C (104F)

 Low noise design, dB<48(A); The inspection method is in accordance with DS/EN ISO3746 while linear actuator is unloaded.

 Overload protection

 CE Certificated Linear Actuator

 Availability in Black, White and Blue housing.

Standard Stroke of Linear Actuator and Min. Install Dimension

Standard Stroke mm		<110	150	200	250	300	350	400
Min. Install Dimension mm	4000N 6000N	>285	325	375	425	475	525	575
	8000N	>325	325	375	425	475	525	575

 

Technical Specification of Linear Actuator

Item No.	Max. Thrust (N)	Max. Pull (N)	Self-Lock (N)	Speed (mm/s)		Duty Cycle (min/h)	Current at full load(A)
				Full load	No load
4000N	4000	3000	4000	5	6.5	6	3.3
6000N	6000	3000	6000	4.2	6.2	6	3.8
8000N	8000	5000	6000	5	6.5	6	6

linear actuator